Installation Guide

9
3. Installation
Overview 3.1
Figure 3-1 provides an overview of the installation process.
Figure 3-1 Installation Process
Install GPS Antenna 3.2
Read the following GPS antenna installation requirements before installing it on the eNB.
 No major blocking from buildings in the vicinity. Make sure the space atop is at least
45 degrees unblocked by any buildings.
 Avoid installing the GPS antenna in the vicinity of any other transmitting and
receiving devices, to avoid interference.
 The GPS antenna should be installed within 45 degrees to the lightning rod.
The GPS antenna system is assembled in manufacturing before packing. The only
installation step is to fix the GPS mounting bracket on the eNB with the M4*14 screws
(Figure 3-2).
Figure 3-2 GPS Antenna Installation