Operation Manual

A-39
APPENDIX
Note:
An alarm message is displayed at lower right part of the radar screen.
1-15. Operational restrictions
AIS function is not available when the manual speed input or SET/DRIFT data is used and following
operational restrictions exist
1) An AIS function cannot turn ON
When "MANUAL" was selected as a speed input source.
When SET and DRIFT was set in “LOG” speed mode
2) "LOG" speed mode cannot be chosen as a speed source.
When an AIS function was ON and SET and DRIFT were set.
3) "MANUAL" speed mode cannot be selected.
.
When an AIS function was ON.
4) DRIFTSET (Current correction) function cannot turn ON.
When an AIS function was ON and speed was set as "LOG".
Alarm message display position