Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
8-46
８
z The speed data cannot be selected when the sentence VBW of NMEA0183
is not entered.
4-2 LOG Setting
(1) Click 1AXIS for 1-axis log.
2.1AXIS will be set.
4-3 Selection of Data against Water for 2-axis Log (NMEA Signal)
(1) Click 2AXIS W .
3.2AXIS W will be set.
4-3 Selection of Data against Ground for 2-axis Log (NMEA Signal)
(1) Click 2AXIS G .
4.2AXIS G will be set.
1 Click EXIT .
The SUB1 Menu will reappear.
2 Click EXIT .
The SUB1 Menu will be closed.
3 Click EXIT .
The MAIN Menu will be closed.
Attention
EXIT