Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
8-6
８
2-2 BUZZER
Refer to (2) Checking Panel in Section 8.1.1 Function Check on Test Menu.
1 Click the TEST on the screen.
The TEST menu will appear.
2 Click PANEL TEST .
The PANEL TEST Menu will appear.
3 Click BUZZER .
The BUZZER Menu will appear. A beep of
the buzzer indicates that the operation is
normal..
1 Click EXIT .
The TEST Menu will be closed.
2-3 LAMP
Refer to (2) Checking Panel in Section 8.1.1 Function Check on Test Menu.
1 Click the TEST on the screen.
The TEST menu will appear.
2 Click PANEL TEST .
The PANEL TEST Menu will appear.
3 Click LAMP .
The LAMP Menu will appear. The key
backlight is turned on, the operation is
normal.
1 Click TEST .
The TEST Menu will be closed.
Note: When performing a LAMP test, the operation cannot be checked if the
Procedures
Exit
Procedures
TEST MENU
０．
EXIT
1.
2.
PANEL TEST
KEY
BUZZER
3.
LAMP
TEST MENU
０．
EXIT
1.
2.
PANEL TEST
KEY
BUZZER
3.
LAMP
Exit