Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
5-3
５
4 Display the CPA LIMIT ring.
(1) Click the "ON" of "3.CPA RING".
“ON”in“3.CPA RING”will be set
and“CPA RING”will appear on the
radar display.
(2) Should the CPA ring not appear, click
the "OFF" of "3.CPA RING".
"OFF" in "3.CPA RING" will be set.
Attention: The CPA RING is not appear in the TRUE Vector mode.
5 Set TCPA LIMIT (Time to CPA)
(1) Click the numeric section of "2.TCPA
LIMIT".
The numeric input dialogue box will be
opened.
(2) Set the number by pressing
the“+”or“−”keys in the dialogue box.
(3) Press ENT to set up the value entry.
1 Click EXIT .
The Sub1 Menu will reappear.
2 Click EXIT .
The Sub1 Menu will be closed.
Attention: The set values of CPA LIMIT/TCPA
LIMIT will appear on the radar display.
Exit
SUB1 MENU
1.CPA LIMIT
2.TCPA LIMIT
０．
EXIT
0.0-9.9nm
ARPA/AIS
1.5
3.CPA RING
TRIAL
4.
5.GATE
2.HIGH
OFF
ON
1-99min
10
AIS SETTING
6.
SUB1 MENU
2.TCPA LIMIT
０．
EXIT
0.0-9.9nm
ARPA/AIS
1.5
3.CPA RING
TRIAL
4.
5.GATE
2.HIGH
OFF
ON
1-99min
10
AIS SETTING
6.