Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3-55
３
①
Display Own Ship’s Tracks and Own Symbols [OWN TRACK]
In the case that Any Navigation Equipment is Connected to This System
When navigation equipment is connected, the own ship’s track data of up to 1024 points that is
sent from the equipment can be stored and displayed. The data storage interval can be set
over 4 levels, 3 minutes (distance that the own ship moves within 3 minutes), 10 minutes, 15
minutes, and 30 minutes.
The setting can be changed by
left-clicking the button on the lower left
of the screen (right figure①).
○ When setting from the mune:
1 Click the MENU button on the screen.
The Main Menu will appear.
2 Click SUB1 MENU .
The Sub1 Menu will appear.
3 Click TRACK .
The TRACK Menu will appear.
4 Select "ON" radio button of "1.IR".
“ON”in“1.TRACK”will be set and own ship's
past track originated its current position will
appear. The current storage time interval will
appear at lower left on the radar display.
1 Select "OFF" radio button of "1.IR".
“OFF”in“1.TRACK”will be set and own ship's track and the storage time interval
will disappear.
Procedures
Cancellation
AUTO
3min
0.5min
PROC1
PROC
TRAILS
TRACK
RAIN
SEA
T
GAIN
SUB1 MENU
1.TRACK
2.INTERVAL TIME
0．
EXIT
OFF ON
TRACK
1. 3min
3. CLR ALL