Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3-51
３
Note: The bearing of the parallel index lines that are displayed in the PI menu
represents the true value when the bearing display of the radar reads N UP or C
UP and the relative value when it reads H UP.
Operation of Parallel Index Lines
◎ Rotate the PL (Parallel Index Lines) in the same direction of rotating the [EBL] control
(① and ②).
◎ The interval of the PI can be decreased as The [VRM] control is rotated anticlockwise
(③ and increased as the [VRM] control is rotated anticlockwise (④).
◎ The rotation and interval of the PI are controlled effectively only from the PI Menu.
When the PI Menu is closed, the parallel index lines are fixed.
◎ Repeat the above procedures from the first step to move the PI again.
◎ Click PI , and the PI Menu will be closed and the PI will be fixed.
Press any of , , , and .
The PI will be fixed and the I Menu will be closed.
Display of Parallel Index Lines