Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3-36
３
[Ⅱ] Changing the Setting of Pull-down Menu
This method is used when there are three or more selections:
① When PROC1 is set as shown below:
2. PROC1
▼
② Move the arrow cursor to the position that is shown below (downward triangle).
2. PROC1
▼
③ Set the arrow cursor on the position in Figure  as shown below and press the left button
on the trackball.
2. PROC1
▼
④ The pull-down menu will appear and selection items are displayed in the menu.
2. PROC1
▼
1. OFF
2. PROC1
3. PROC2
4. PROC3
⑤ Move the cursor with the trackball.
2. PROC1
▼
1. OFF
2. PROC1
3. PROC2
4. PROC3
⑥ Set the cursor on the item to be selected and press the left-button on the trackball.
3. PROC2
▼
1. OFF
2. PROC1
3. PROC2
4. PROC3
⑦ The pull-down menu will be closed and the setting is established.
3. PROC2
▼