Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
A-21
APPENDIX
1-3. AIS Function ON/OFF
■ON/OFF of AIS function is set up. There are two methods to switch ON/OFF of AIS function.
(Method-1 : With the AIS software button on screen.)
Put the arrow cursor on the button at the lower left a screen and click the left
button of the track ball. Every time the left section button is pressed, AIS function on/off
changes alternatively as follows.
a. When the symbol is displayed in the bright color -----AIS function is ON.
b. When the symbol is displayed in the dark color -------AIS function is OFF.
(Method-2 : With the menu operation.)
1. Left-click MENU on the screen.
Main menu opens.
2. Left-click SUB1 MENU .
SUB1 menu opens.
3. Left-click ARPA/AIS .
ARPA/AIS menu opens.
4. Left-click AIS SETTING.
AIS SETTING menu opens.
5. Left-click "ON" or "OFF" of "1.AIS FUNCTION".
"1.AIS FUNCTION" is changed to on or off.
Note:
When AIS function is OFF, no AIS symbol is displayed and all AIS functions are completely
turned off. Even if there is a dangerous target, AIS function would not be turned on
automatically.
Operation
procedure
F
SUB1 MENU
ARPA
TRIAL
AIS SETTING
EXIT
1. CPA LIMIT
2. TCPA LIMIT
1.5
10
3. CPA RING
OFF ON
4.
5. GATE
6.
2. NARROW
0.
1-99min
0.1-99nm
△
▽
△
▽
▽