Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
8-7
８
brilliance level of the key backlight is at maximum. (The brilliance will not
change)
3 ARPA TEST
3-1 SIMULATOR
Refer to (3) Checking ARPA in Section 8.1.1 Function Check on Test Menu.
1 Press to set the standby
mode.
2 Click the TEST on the screen.
The TEST menu will appear.
3 Click RPA TEST.
The ARPA TEST Menu will appear.
4 Click SIMULATOR .
“1.SIMULATOR”will be selected and the
pull-down menu will appear.
5 Select any setting item of ARPA
Simulator in the pull-down menu
and press any of 1 to 7.
6 Press to set the transmission mode.
1 Click TESE .
The TEST Menu will be closed.
Note: In normal operation, it is necessary to turn off the "SIMULATOR".
Procedures
Exit
TEST MENU
０．
EXIT
2.TEST VIDEO
ARPA TEST
1.OFF
3.
STATUS
1.SIMULATOR
1.OFF
2.VDG
3.VDH
4.VDL
5.VDIN
1.OFF
TX
STBY
TX
STBY