Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3-68
３
 In watching a radar mark or SART signal on the radar display, set the system to:
IR OFF (Radar Interference Rejection OFF)
1 Execute the procedures to display processed videos up to
step 2.
2 Click OFF .
1.OFF will be set.
1 Click EXIT .
The Main Menu will be closed.
Reduce Radar Interference････････････････････････････････
This function is used when the interference from other ship's radar is strong.
By left-clicking the button on the lower right of the screen,
it is possible to set on or off.
1 Click MENU.
The Main Menu will appear.
2 Click "ON" radio button of IR .
“ON” in “1.IR” will be set and the radar interference rejection will be set to ON to
reduce radar interference.
1 Click MENU.
2 Click "OFF" radio button of IR .
“OFF” in “1.IR” will be set and the radar interference rejection will be set to
OFF.
1 Click EXIT .
The Main Menu will be closed.
Cancellation
Exit
Attention
Procedures
Cancellation
Exit