Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3-52
３
Change Relative Motion (RM) Mode to True Motion (TM) Mode
1 Click the RM button on the upper left of the screen.
The Relative Motion mode is changed to the True Motion mode. In the True
Motion mode, the position of own ship on the display moves depending upon
its course and speed and the influence of the current. Land and other fixed
ranges are fixed on the display and only actually moving targets move on the
radar display. When the True Motion mode is selected, own ship’s position
will be set to about 66% of the display radius in the opposite direction to its
course allowing for the influence of the current. Own ship will start moving
depending upon its course and speed and the influence of the tide.
Subsequently, when own ship arrives at the position of about 66% of the
display radius, the ship will be automatically reset to its initial position at about
65% of the display radius in the opposite direction to its course allowing for the
influence of the current.
Change True Motion (TM) Mode to Relative Motion (RM) Mode.
1 Click the TM button on the upper left of the screen.
The True Motion mode is dhange to the Relative Motion mode.
One ship nrill be reset to center position.
Procedures
Fixed on the radar displa
y
Moving depending on own ship’s speed
True Motion Display
Procedures