Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

3-42

３

EBL2 Operation

f EBL1 is selected, press to select EBL2 before operation. (The currently selected EBL

indicated by characters in the lower right of the radar display.)

EBL Bearing Display

The bearing values of EBL1 and EBLL2 currently displayed within the PPI video

are indicated at the lower right of the radar display. For the currently operable

EBL, the characters EBL1 or EBL2 are displayed in reverse video.

Starting Point of EBL

The starting point of the currently operating EBL can be changed over to the

center of the radar display (CENTER) or to any offset position (OFFSET).

Note: For OFFSET of the EBL’s starting point, it is possible to determine whether the

starting point is fixed at the specific latitude and longitude.

EBL2 will be displayed

in reverse video.

EBL2 will disappear.

Press

Procedures