Operation Manual
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
1−26
1
SK-32C
(5A)
NKE-1087-9 SCANNER UNIT
250V-DPYCYS-1.25
CIRCUIT BREAKER
(OPTION)
SHIP'S MAIN
AC100/110V
50/60Hz,1φ,100W
14 CORES COMPOSITE CABLE
H-2695110056
MAX 65MT φ23(JRC SAPPLY)
NCD-4263 DISPLAY UNIT
250V-MPYCYS-5
250V-DPYCYS-1.25
250V-TTYCS-1
660V-TPYCYS-5.5
SHIP'S MAIN
AC100/110/220/230V
60Hz, 1φ
AC220/230V
60Hz, 3φ
600VA
GYRO
LOG
GPS
Eliminating the interference on frequencies used for marine communications and
navigation due to operation of the radar.
All cables of the radar are to be run away from the cables of radio equipment.
(Ex. Radiotelephone. Communications receiver and direction finder. etc)
Especially inter-wiring cables between scanner unit and display unit of the radar
should not run parallel with the cables of radio equipment.
Note:
Fig.1.18 GENERAL SYSTEM DIAGRAM OF
RADAR, TYPE JMA-9922-9XA
9922
- 1 0 8 7 - 9
4 2 6 3
AC100/230V
50/60Hz, 1
AC220V
50/60Hz, 3
800VA
Φ
Φ










