Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
1−21
１
SK-32C
(5A)
GYRO
LOG
ＧＰＳ
250V-MPYCYS-5
250V-DPYCYS-1.25
250V-TTYCS-1
660V-TPYCYS-5.5
AC110/220V
60Hz, 1φ
AC220V
60Hz, 3φ
800VA
NCD-4263 DISPLAY UNIT
14 CORES COMPOSITE CABLE
H-2695110056
MAX 35MT φ23 (JRC SUPPLY)
14 CORES COMPOSITE CABLE
H-2695110056
MAX 30MT φ23 (JRC SUPPLY)
NTG-3037 TRANSMITTER-RECEIVER UNIT
COAXIAL CABLE
HF-20D (JRC SUPPLY)
NKE-1079 SCANNER UNT
250V-DPYCYS-1.25
CIRCUIT BREAKER
OPTION)
SHIP'S MAIN
AC100/110V
50/60Hz, 1φ, 200W
Eliminating the interference on frequencies used for marine communications and
navigation due to operation of the radar.
All cables of the radar are to be run away from the cables of radio equipment.
(Ex. Radiotelephone. Communications receiver and direction finder. etc)
Especially inter-wiring cables between scanner unit and display unit of the radar
should not run parallel with the cables of radio equipment.
Eliminating the interference on frequencies used for marine communications and
navigation due to operation of the radar.
All cables of the radar are to be run away from the cables of radio equipment.
(Ex. Radiotelephone. Communications receiver and direction finder. etc)
Especially inter-wiring cables between scanner unit and display unit of the radar
should not run parallel with the cables of radio equipment.
Note:
Note:
Fig.1.13 GENERAL SYSTEM DIAGRAM OF
RADAR, TYPE JMA-9933-SA
SHIP'S MAIN
9933
3038
4 2 6 3
AC100/230V
50/60Hz, 1
AC230V
50/60Hz, 3
1kVA
Φ
Φ