Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
A-42
APPENDI
X
3-3. Set up after Installation
Set up a link pin, as shown in the following figure.
3-4. Turn on & Check
Turn on ship’s main power. And turn on radar power.
AIS I/F is operating normally if the button for AIS (refer to 1-1.AIS button) is displayed on the
screen lower left.
, The connection or the setup may not be performed correctly if the AIS button is not displayed.
Please turn off the radar and check connection and a setup.
Note:
Refer to the installation manual in the case of connection.
S101
１
０
ON
1 2 3 4 5 6 7 8
S100
１
０
ON
1 2 3 4 5 6 7 8
S102
１
０
ON
1 2 3 4 5 6 7 8
S100
S101
S102
Note.
It differs from "JMA-9800
."