Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

A-28

APPENDI

Note:

When the numerical data is displayed without mark on the radar screen, the target

might exist out of the radar display range.

■ Target Data Display Cancel

1. Press

Cursor mode changes and "TGT DATA" is displayed on the upper right of the screen.

2. Put the cross cursor “+” on the target to be turn off the numerical data display and

press the track ball section left button .

The numerical information of the selected AIS target data is removed from the

numerical data area at the right-hand side of the screen and the symbol

disappears.

■ Target Data Display in simple/detail mode

1. Put the cursor on the buttons or at the upper right of AIS target

numerical data area, and press the trackball section left button.

2. Every time the button is pushed, the mode of numerical data changes to simple

or detail as follows..

Example of Detail mode

Example of Simple mode

When button is

pushed, display

mode is changed

Button

Operation

procedure

ＴＧＴ

ＤＡＴＡ

Operation

procedure