Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
A-27
APPENDIX
1-8. AIS Target Data Display
■ Types of Data Display
The detailed or simple numerical data of an AIS target are available. The display items in each
detailed and simple mode are shown as follows.
Display Items Detailed Mode Simple Mode
ＮＡＭＥ（Ship’s Name） Max 20 characters Max 20 characters
ＣＡＬＬ ＳＩＧＮ Max 7 characters Max 7 characters
ＭＭＳＩ Max 9 characters Max 9 characters
ＣＯＧ Unit 0.1 degrees Unit 0.1 degrees
ＳＯＧ Unit 0.1 knots Unit 0.1 knots
ＣＰＡ Unit 0.1 nm Unit 0.1 nm
ＴＣＰＡ Unit 0.1 min Unit 0.1 min
ＢＲＧ Unit 0.1 degrees
ＲＡＮＧＥ Unit 0.01 nm
ＨＤＧ Unit 0.1 degrees
ＲＯＴ Unit 0.1°／min
Ｌ／Ｌ (Lat/Lon) Unit 0.001 seconds
No display
One target data in the detailed mode or two target data in the simple mode are displayed at the
numerical data area on the screen.
■ Target Data Display
1. Press
Cursor mode changes and "TGT DATA" is displayed on the upper right of the screen.
2. Put the cross cursor “+” on the target to be data displayed
and press the track ball
section left button .
The numerical information of the selected AIS target is displayed at the right side of
the screen, and is displayed on the AIS target symbol.
ＴＧＴ
ＤＡＴＡ
Operation
procedure