Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
8-48
８
Procedures
z Setting with this function is valid only when MANUAL or 1AXIS is selected for
ship’s speed setting (SPEED).
Current Correction (SET/DRIFT) Setting･････････････････････
The current set and drift will be set.
1 Click MENU on the screen.
Or press OPTION2 key.
The MAIN Menu will appear.
2 Click SUB1 MENU, then STTING1 .
The STTING1 Menu will appear.
3 Click SET/DRIFT .
The SET/DRIFT Menu will appear.
4 Click “1.CORRECTION” to “ON” .
“ON” in “1.CORRECTION” will be set to
operate the current correction mode.
If the current correction mode is not operated, press “1.CORRECTION”to set
it to “ＯＦＦ”．
5 Set “1.CORRECTION” to “ON” and click the “2.SET” edit
box.
The numeric input dialogue box will be opened.
6 Enter any angle of the current set using 0 to 9 or + and - ,
and press END to set it up.
The current set will be set.
7 Set “1.CORRECTION” to “ON“ and click the “3.DRIFT” edit
box.
The numeric input dialogue box will be opened
Attention
SUB1 MENU
1.CORRECTION
０．
EXIT
SETTING1
SET/DRIFT
OFF ON
2.SET
0.0
0.0-359.9゜
3.DRIFT
0.0
0.0-15.0kts