Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
8-3
８
Procedures
1 SELF CHECK
1-1 SENSOR
1 Click TEST on the screen. Or click OPTION1 key.
The TEST Menu will appear.
2 Click SELF CHECK .
The SELF CHECK Menu will appear.
3 Click SENSOR .
The SENSOR Menu will appear.
4 Check OK on each item.
If any item is no good, NG will be selected.
In the standby mode, ** will be selected for VIDEO.
If the safety switch on the scanner is OFF, OFF will be selected.
Scanner Rotation Signal
Safety Switch on the Scanner
Ship's Heading Line Signal
Load Current of High Voltage in Modulator
Radar Trigger Signal
Radar Video
Fan 1
Fan 2
1 Click EXIT .
The SELF CHECK Menu will reappear.
2 Click EXIT .
The TEST Menu will reappear.
2 Click EXIT .
The TEST Menu will be closed.
EXIT
TEST MENU
０．
EXIT
* SAFETY SWITCH
* AZI PULSE
SELF CHECK
SENSOR
OK
OK
* HL PULSE
OK
OK
OK
OK
OK
OK
* MH CURRENT
* TRIGGER
* VIDEO
* FAN1
* FAN2