Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
5-31
５
5 When moving the pseudo target:
[Ⅰ] SCENARIO1
Click SCENARIO1 , then to set the transmission mode.
2.SCENARIO1 will be set to generate a pseudo target at the true bearing
of 18°and the relative range of 3.2NM. The target will then approach true
bearing of 90°and the relative range of 1NM at a relative speed of
20kts .Characters“XX”appear blinking at the lower of the radar display,
showing that the system is executing the simulation mode.
[Ⅱ] SCENARIO2
Click SCENARIO2 , then to set the transmission mode.
3.SCENARIO2 will be set to generate a pseudo target at the true bearing of
0°and the relative range of 6NM. The target will then approach own ship at
a relative speed of 10 kts in a relative course of 180°.
Characters“XX”appear blinking at the lower of the radar display, showing
that the system is executing the simulation mode.
Note: When the range between own ship and the pseudo target is 0,
the target will disappear.
6 When finishing the simulation, press to set the standby
mode, then click OFF .
1.OFF will be set.
1 Click EXIT or TEST .
The TEST Menu will be closed.
Pseudo Target Parameters
Start point End point SCENARIO
NUMBER
Distance Direction Distance Direction
Target
speed
1 3.2NM
18°
1NM
90°
20kts
2 6NM
0°
0NM
0°
10kts
3 6NM
18°
1NM
18°
10kts
4 6NM
45°
1NM
45°
105kts
5 6NM
45°
6NM
150°
20kts
6 6NM
45°
6NM
150°
20kts
Exit
TX
STBY
TX
STBY
TX
STBY