Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

5-19

５

Method of Displaying Target Data [TGT DATA]･･･････････････

1 Press .

TGT DATA will appear in the CURSOR ( ) at the upper right of the radar

screen.

2 Move the cross cursor to a target (being tracked) to indicate its

data using the trackball. Next, press the left trackball button

to select it. (Up to two targets can be selected.)

The data of the designated target will be displayed, and the symbol will change to

“□”. The target data will remain on the radar display until the target is lost and

its vector disappears, or until another target is designated.

If a target with the “ ” symbol is designated, only its true bearing (BRG) and

range (RNG) will appear until its vector appears.

Cancellation of Displaying Target Data [TGT DATA]･･･････････

1 Press .

TGT DATA will appear in the CURSOR ( )at the upper right of the radar

screen.

2 Move the cross cursor to a target (being target) to indicate its

data using the trackball. Next, press the right trackball button

to select it.

The data of the designated target will be deleted, and the symbol will, change to

acquisition mark.

Procedures

TGT

DATA

TGT

DATA