Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

5-11

５

 If the maximum number of targets (50) is already acquired, then new targets

cannot be acquired. To do so, cancel any current targets that are not required.

Manual Acquisition [ACQ MANUAL]･････････････････････････

1 Press .

2 Move the cross cursor on to the target to be acquired, then

press the left trackball button .

The acquired target will be marked with “ ” and it’s target ID No. Its vector will

appear within one minute.

Attention: When the Target ID No. display is set to OFF, any captured target ship will not

be given a target ID No.

Number of Targets and Acquisition Area

To use the manual acquisition mode only without the automatic mode on concurrently,

press [ACQ AUTO] to turn Automatic Acquisition OFF.

Attention

Procedures

Target to be acquired

ACQ

MANUAL