Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3-88
３
Function of USER Switch / OPTION Switch................................
USER Switch
In the initial setting, the vector length maximum ON/OFF is registered.
These funcions can be changed only by service personnel.
Functions Registerable in USER Switch:
①Vector Length Maximum: ON/OFF
ON: Vector length 60 min (max)
OFF: Vector length Time set on VECTOR TIME Menu.
②NAV/MAP INFO Menu: ON/OFF
ON: The NAV/MAP INFO Menu will appear.
OFF: The NAV/MAP INFO Menu will be closed.
③Parallel Index Line Display: ON/OFF
ON: The parallel index lines set on the PI Menu will appear on the radar
display.
OFF: The displayed parallel index lines will be cleared.
OPTON Switch
①OPTON1 Switch
The registered function is called. Also, if an option is connected, then this is used to
operate that option.
The call of a MENU is assigned at the time of factory shipments.
②OPTON2 Switch
The registered function is called. Also, if an option is connected, then this is used to
operate that option.
The call of a TEST is assigned at the time of factory shipments.