Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3-76
３
2 MAKE (Make up navigational information)
1 Click MAKE .
The MAKE Menu will appear.
2 Press any of 1 to 8 to clear any item navigation information.
1 : Make NAV LINE.
2 : Make COAST Line.
3 : Make CONTOUR.
4 : Make MARK1.
5 : Make MARK2.
6 : Make MARK3.
7 : Make MARK4.
When one of 1 to 7 is selected, NAV MAKE will appear in the CURSOR ( ) at
the upper right of the radar display.
3 Move the cross cursor mark to the starting point of a line or
any element of a mark using the trackball, and click the
trackball section left button.
The starting point of a line or the element of a mark to mark will be set up.
4 Repeat step 3 above. If a line or mark is completed, click the
ENT .
Then, a line or a mark will be made.
5 Repeat the steps 2 to 4 to make another line or mark.
6 Click EXIT when all NAV INFO item is made.
The EDIT Menu will reappear.
Procedures
SUB1 MENU
1.
０．
EXIT
NAV/MAP INFO
NAV/MAP
EDIT
2.
3.
MAKE
NAV LINE
4.
5.
COAST
CONTOUR
MARK1
MARK2
MARK3
MARK4
ENT
6.
7.
8.
REMAIN POINT
256