Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3-63
３
Reset Alarm Buzzer [ALARM ACK]････････････････････････
ALARM ACK is the function of acknowledging the alarm item when an alarm sounds and stopping
an alarm sound as well as canceling flickering display. (If there are two or more alarms, it is
necessary to operate the switch for each alarm indication.) The alarm sound can be stopped, but
the alarm indication is not cancelled.
Stopping Alarm Sound
1 Press .
Or left-click the alarm display area on the screen.
The alarm sound will be stopped.
Set Alarm Sound Level･･･････････････････････････････････
This function sets the sound and volume level of the alarm (alarm sound) to be delivered from the
keyboard.
Setting Alarm Sound level
1 Click the MENU on the screen.
The Main Menu will appear.
2 Click SUB1 MENU .
The Sub1 Menu will appear.
3 Click LEVEL .
The LEVEL Menu will be selected.
4 Click BUZZER .
5.BUZZER will be selected and the pull-down
menu will appear.
5 Select any level from 1 to 7 for
BUZZER volume level in the
pull-down and click it.
Procedures
Procedures
SUB1 MENU
2.VRM
０．
EXIT
3.EBL
4.CHARACTER
5.VIDEO(ECHO)
6.ARPA
7.BUZZER
LEVEL
1.RANGE RINGS
7.LEVEL7
4.LEVEL4
4.LEVEL4
4.LEVEL4
4.LEVEL4
4.LEVEL4
1.LEVEL1
2.LEVEL2
3.LEVEL3
4.LEVEL4
5.LEVEL4
5.LEVEL5
6.LEVEL6
7.LEVEL7
ALARM
ACK