Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3-37
３
10.0
10.0
[Ⅲ] Changing the Setting of Pull-down Menu
This method can be used in most of boxes where a numeric value is to be entered.
① 0.0-100.0kts
When the value is set as shown in the figure ①:
The minimum and maximum (min-max) are displayed on the left side and the unit is also
displayed if present.
② 0.0-100.0kts
To increase the value, move the arrow cursor to the position in the figure ② (upward
triangle) with the trackball.
③ 0.0-100.0kts
With the arrow cursor on the position in the figure ②, click the trackball section left button
once.
④ 0.0-100.0kts
The value will be increase in the minimum step.
⑤ To increase the value continuously:
Hold down th trackball section left button in the figure ③.
⑥ To decrease the value:
Move the arrow cursor to the downward triangle in the figure ②.
The following procedures are the same as for increasing.
10.0
10.1