Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3-50
３
2 Click DATA OFF .
All the display items except radar display,
VRMs, EBLs, HL, cross cursor mark [＋] and
range rings will disappear from the radar
display.
1 Click DATA OFF .
7.DATA OFF will be reset and, the
information temporarily cancelled will
reappear.
1 Click EXIT .
The Main Menu will be closed.
Display PI（Parallel Index Lines ）[PI]･･････････････････････
Parallel index lines can be displayed in a semicircular area.
1 Click the PI on the screen.
The PI Menu will appear.
2 Select "ON" radio button of "1.IR".
“ON” in “1.MODE” will be set and parallel
index lines will appear on the radar display.
The direction of PI will be changed by rotating
the [EBL] control, and the line intervals will be
changed by rotating the [VRM] control.
1 Select “OFF” of “1.MODE”.
“OFF” in “1.MODE” will be set and the PI will
disappear on the radar display.
1 Click EXIT .
The PI Menu will be closed.
Cancellation
Exit
MAIN MENU
1.IR
CENTER
2.TUNE
０．
EXIT
OFF
ON
OFF
ON
3.PROCESS
2.PROC1
4.FUNCTION
1.FUNC OFF
5.EBL1
OFFSET
6.EBL2
CENTER
OFFSET
DATA OFF
SUB1 MENU
CODE INPUT
7.
8.
9.
Procedures
Cancellation
Exit
PI
1.MODE
0.
OFF ON
PI
INTERVAL
EXIT
* * . *
* * . * °
nm