Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3-45
３
Set Floating EBL････････････････････････････････････････
When this function is turned on and the starting point of EBL is moved to a position, the starting
point can be fixed at the latitude and longitude of that position. This function is effective when the
bearing from a certain point is repeatedly measured.
With this function OFF, the starting point of EBL is pasted on the radar display. When own ship is
moved, the starting point will remain at the same point on the display.
1 Select in the following order:
"MENU","MENU","SETTING1","SETTING2".
The SETTING2 Menu will appear.
2 Click EBL OFFSET ORIGIN.
The EBL OFFSET ORIGIN menu will appear.
[I] Setting the Mode when the EBL1 Starting Point is Moved
1 Perform the operating procedure 1 .
The EBL OFFSET ORIGIN Menu will appear.
“EBL1 L/L FIX” is set to the initial mode “OFF”.
When the EBL1 starting point is moved, the
starting point of EBL1 will remain at the set
position on the radar display.
2 Select the "ON" radio button.
“EBL1 L/L FIX” will switch from “OFF” to “ON”.
When the EBL1 starting point is moved to
another position, the starting point of EBL1 will
be fixed at the latitude and longitude on that
position.
3 Select "OFF".
Place the cursor over the "OFF" radio button,
and left-click.
Procedures
SETTING2
1.EBL1 L/L FIX
2.EBL2 L/L FIX
０．
EXIT
OFF ON
OFF
ON
EBL OFFSET ORIGIN