Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3-22
３
Day/Night Mode Selection [DAY/NIGHT]････････････････････
Whenever the [DAY/NIGHT] switch is pressed, the mode is changed over from DAY1 → DAY2
→ NIGHT1 → NIGHT2 and the current mode is indicated at the lower right of the radar
display. The brilliance levels selected for each mode are saved. For brilliance adjustment, refer to
page 3 -12. For selection of DAY/NIGHT mode by menu operation, refer to “Color Setting” on the
next page.
Color Setting [COLOR]･･･････････････････････････････････
T
he colors of the Day/Night mode [Day1, 2/NIGHT1, 2], system, background color outside the
bearing scale, background color inside the bearing scale, echoes, characters, dials, own ship’s track,
and radar trails are set up.
Color Adjustment by Menu Operation
[DAY/NIGHT] Register of DAY/NIGHT mode
[SYSTEM] System color adjustment
[OUTER PPI] Adjustment of the background color outside the bearing scale
[INNER PPI] Adjustment of the background color inside the bearing scale
[CHARACTER] Adjustment of character colors
[DIAL] Adjustment of dial color
[ECHO] Adjustment of echo colors
[TRAILS] Adjustment of the color of radar trails
[OWN TRACK] Adjustment of the color of own ship’s track
1 Click the MENU on the screen.
The Main Menu will appear.
2 Click SUB1 MENU .
The Sub1 Menu will appear.
3 Click SUB2 MENU .
The Sub2 Menu will appear.
4 Click COLOR .
The COLOR Menu will appear.
Procedures