Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
A-24
APPENDI
X
1-5 AIS Target Deactivation
When an AIS target is deactivated, the vector and the heading are deleted as a
sleeping
2
target.
(Method-1 : With the software button on the screen)
1. Put the arrow cursor on the DACT button and click the track ball section left
button.
Cursor mode ”AIS DEACT" is displayed at the upper right side on the screen.
2. Put the cross cursor “+” on the target to be deactivated and press the track ball
section left button .
The selected AIS target is deactivated.
(Method-2 : With the menu operation)
1. Left-click MENU on the screen.
Main menu opens.
2. Left-click SUB1 MENU .
SUB1 menu opens.
3. Left-click ARPA/AIS .
ARPA/AIS menu opens.
4. Left-click AIS SETTING.
AIS SETTING menu opens.
5. Left-click "ON" of "3.AIS DEACTIVATE".
Cursor mode ”AIS DEACT" is displayed at the upper right side on the
screen.
6. Put the cross cursor “+” on the target to be deactivated and press the track ball section
left button . The selected AIS target is deactivated.
Note
This operation is only available for an activated target.
※
2
Refer to "1.9 Definitions of AIS Target Symbols” about the sleeping target.
Operation
procedure