Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
8-53
８
Adjust the PM pattern
using the ten-key or [+]
and [-] so that its outer
edge is within 12 to 18 NM.
(See step 2)
PM Pattern
1 Click EXIT .
The PM PRESET Menu will be closed and the display will return to the
status existing before the tests were conducted.
Note: • All target acquisitions by ARPA functions will be
cancelled.
The target acquisition cancelled when PM is ON will not
be recovered.
• The radar image is suppressed to make the PM image
easier to see.
Therefore, the ADJUST MENU should be always opened
after PM check is completed.
12 to
18 NM
EXIT