Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
8-37
８
Procedures
ADJUST
1.TUNE
2.BEARING
０．
EXIT
0-127
1.5
3.CPA RING
4.ANTENNA HEIGH
0.0-359.9゜
10
ARPA/AIS
5.
000.0
0-999
SECTOR BLANK
MBS
6.
7.
3.OVER 25m
1.UNDER 15m
2.15m-25m
3.OVER 25m
Antenna Height Adjustment････････････････････････････････
Set the height of the antenna above the sea level.
Do not change this setting inadvertently.
1 Click MENU on the screen. Or press OPTION2 key.
The MAIN Menu will appear.
2 Click CODE INPUT.
The CODE INPUT Menu will appear.
3 Click 0 , then END .
The ADJUST Menu will appear.
4 Click the “4.ANTENNA HEIGHT”edit
box.
4.ANTENNA HEIGHT will be selected.
5 Measure the height from the sea
surface to the top of the antenna,
then select the corresponding
antenna height from the pull-down
menu.
The selected antenna height value will be set.
1 Click EXIT .
The ADJUST Menu will be closed.
2 Click EXIT .
The CODE INPUT Menu will be closed.
3 Click EXIT .
The MAIN Menu will be closed.
EXIT