Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
8-36
８
Procedures
1 Click EXIT .
The ADJUST Menu will be closed.
Range Adjustment･････････････････････････････････････････
Adjust the range that the range of the target on the radar video is indicated correctly.
1 Click MENU on the screen. Or press OPTION2 key.
The MAIN Menu will appear.
2 Click CODE INPUT .
The CODE INPUT Menu will appear.
3 Click 0 , then END .
The ADJUST Menu will appear.
4 Click the “3.RANGE”edit box.
3.RANGE will be selected.
5 Find a target on the radar display the
range of which is already known.
（For example, assume that the actual range of
the target is 0.33NM)
6 Using + and - , adjust the target echo's position to the
position of the target selected in step 4 above. Press END to
set it.
Move the target echo upward by + and downward by - .
1 Click EXIT .
The ADJUST Menu will be closed.
2 Click EXIT .
The CODE INPUT Menu will be closed.
3 Click EXIT .
The MAIN Menu will be closed.
EXIT
EXIT
ADJUST
1.TUNE
2.BEARING
０．
EXIT
0-127
1.5
3.CPA RING
4.ANTENNA HEIGH
0.0-359.9゜
10
ARPA/AIS
5.
000.0
0-999
SECTOR BLANK
MBS
6.
7.
3.OVER 25m