Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
8-9
８
Procedures
3-3 STATUS
1 Click TEST on the screen. Or click OPTION1 key.
The TEST Menu will appear.
2 Click ARPA TEST .
The ARPA TEST Menu will appear.
3 Click STATUS .
The STATUS Menu will appear to indicate the ARPA setting values and
conditions.
Vector Constant
(Refer to Vector Constant in Section 8.5
ADJUSTMENTS)
Quantization Level in Automatic Acquisition
(Refer to Quantization Level in Section
8.5 ADJUSTMENTS)
Quantization Level on medium and Short
Ranges (Refer to Quantization Level in
Section
8.5 ADJUSTMENTS)
Quantization Level on Long Range
(Refer to Quantization Level in Section
8.5 ADJUSTMENTS)
Ｇate Size
(Refer to Gate Size in Section 5.10 ARPA
SETTING)
Current Numbers of Targets Under Tracking
1 Click EXIT .
The ARPA TEST Menu will reappear.
2 Click EXIT .
The TEST Menu will be reappear.
3 Click EXIT .
The TEST Menu will be closed.
EXIT
TEST MENU
０．
EXIT
ARPA TEST
STATUS
* CONSTANT
4
* VID LEVEL TD
45
* VID LEVEL HI
40
* VID LEVEL LOW
35
* GATE SIZE
NARROW
* TRACKING
0