Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
8-4
８
Procedures
1-2 LINE CHECK
1 Click TEST on the screen. Or click OPTION1 key.
The TEST Menu will appear.
2 Click SELF CHECK .
The SELF CHECK Menu will appear.
3 Click LINE CHECK .
The LINE CHECK Menu will appear.
4 Check whether each communication line is connected.
・When the device is connected: CONNECT
・When the device is not connected: DISCONNECT
・When the not recognition: ＊＊＊＊＊
Transmitter-receiver Unit
Signal Processing Circuit
ARPA Processing Circuit
Serial Interface Circuit
NSK Unit
Interswitch (Option)
Navigation Equipment 1
Navigation Equipment 2
2-axis Log
1 Click EXIT .
The SELF CHECK Menu will reappear.
2 Click EXIT .
The TEST Menu will reappear.
3 Click EXIT .
The TEST Menu will be closed.
EXIT
TEST MENU
０．
EXIT
* MTR
* SIG.PROC.
SELF CHECK
LINE CHECK
CONNECT
CONNECT
* ARPA
* SERI I/F
* NSK
* ISW
* NAV1
CONNECT
CONNECT
CONNECT
CONNECT
CONNECT
CONNECT
CONNECT
* NAV2
* 2AXIS