Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
5-12
５
Use of Automatic and Manual Acquisition Modes [GZ1、GZ2]
[ACQ MANUAL]･･･････････････････････････････････････････
Method of Operation
Execute manual target acquisition in the automatic acquisition mode, that is, in the state in
which the Automatic Acquisition mode [GZ1, GZ2] is ON.
Use of Combined Auto/Manual Mode
When both automatic and manual acquisition modes are used concurrently, important
targets should be acquired manually, and the rest should be acquired automatically. If
new targets enter the zone and they exceed the maximum number of targets that can be
acquired, manual targets will continue to be displayed until they leave the guard zone, but
automatically acquired targets will be cancelled according to their degree of importance.
Manually acquired target.
The initial acquisition symbol is displayed.
Target that has intruded into the zone for one minute.
The acquisition symbol and vector are displayed.