Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
5-4
５
Automatic Setting Mode (System Start)･････････････････････
See sections 3.4 “Basic Operations” and 4 “Measurement of Range and Bearing” for descriptions
of operation.
Fig. 5-1 Mode Setting at System Start
Mode Initial setting Refer to Section
DISPLAY MODE RM (relative motion) 3.4
ACQUIRE AUTO OFF 5.3
TRIAL OFF 5.7
GUARD ZONE OFF 3.4, 5.6
Setting Range Scale: (RANGE SCALE)･･････････････････････
The ARPA functions can operate on all range scales. Usually, set the range between 1.5 to 24 NM
depENTing on the area of operation.
Attention: The ARPA acquisition range is 0.1 to 32 NM.