Operation Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

3-81

３

6 Enter a longitude value (XX゜XXX.XX’) using any of 0 to 9.

7 Press SET .

The longitude value entered manually will be set up.

Note: The own ship's position entered manually is effective only in the NAV/MAP

INFO Menu.

2 Select Equipment to Load the Read-out Navigational Information

In the case that any electronic positioning equipment such as GPS is

connected to the system, or that own ship's position is entered manually, the

data can be read out.

1 Click LOAD .

The LOAD Menu will appear.

2 Click DEVICE .

1.DEVICE will be selected and the pull-down

menu will appear.

Procedures

SUB1 MENU

０．

EXIT

NAV/MAP INFO

NAV/MAP

LOAD

LODE

1.DEVICE

1.INTERNAL