Users Manual

Operation
4-27
(2) Safety position request calls
■ Procedure ■
1
1
1
.
.
.
From the main menu, select [CALL]→ [EDIT]→ [CALL
TYPE] and select SAF/INDV/POSRQ in CALL TYPE.
 Input the address to call from the station list or manually
using numeric keypad.
 The station selecting procedure such from the station
lists is similar to the routine calls mentioned above.
2
2
2
.
.
.
Touch the [CALL] button to send the position request
call.
After checking the free channel, the safety position request
call is sent and the screen at right is displayed.
3
3
3
.
.
.
When acknowledgement is received, the RX DSC mark
flashes and the alarm sounds. After silencing it with the
[STOP] button, a received screen as shown at right
appears.
The position data of the station is indicated in the Position
field usually, and this procedure is complete. However note
that even though the call is sent normally, the
acknowledgement may not be received from the called
station for some reason.