Users Manual
Operation
4-20
4.3.3 Routine group calls
For radiotelephone broadcasting, a DSC routine call to a group of stations is available.
■ Procedure ■
1
1
1
.
.
.
From the main menu, touch the [CALL] → [EDIT] →
[CALL TYPE] buttons.
2
2
2
.
.
.
Set the CALL TYPE to RTN/GROUP/RT as shown at
right and then touch the [✓ ] button.
3
3
3
.
.
.
The group list registered before is appeared as shown
at right (alphabetically sorted) and touch the receiver
group for the routine group call.
The working channel is set automatically.
If the group list is not registered, input manually.
The
group list can be registered on the GROUP
menu (MENU> SETUP> ADDR LIST).
4
4
4
.
.
.
Touch the [CALL] button to send the group call.
After checking the free channel condition, sends the
message.
5
5
5
.
.
.
After sending the message, the working channel is set
and the DSC calling procedure is finished.
Start broadcasting using the handset.
Note