Users Manual

Operation
4-19
4
4
4
.
.
.
After sending an acknowledgement, the working
channel is set to communicate.
Start communicating using the handset.
Incase of receiving a polling call, the following screen is displayed with the RX
DSC mark flashing for a moment, and the alarm sound grows louder gradually.
Then touch the [STOP] button to silence alarm and
select [ACK] to send the
acknowledgement.
Additionally, if the polling call on the AUTO ACK menu (MENU>SETUP>DSC OPE)
is set to on, and if there is no active DSC or non-DSC communication event, this
polling call is acknowledged automatically.
Note