Users Manual

Operation
4-6
18
2-
20
20
A
Changing the channel
(1) Setting a 2-digits channel (Incase of the CH18)
1
1
1
.
.
.
On the status display or operations screen, touch
the channel display area or the ten-key icon button
to indicate the numeric keypad.
2
2
2
.
.
.
Touch the [1] button.
“1” is appeared. Then if left for more than 1 second, the
hyphen is appeared and starts flashing as shown at right.
3
3
3
.
.
.
Touch the [8] button.
Setting of the CH18 is finished.
(2) Setting a 2-digits channel with a letter A/B (Incase of the USA CH20A)
1
1
1
.
.
.
On the status display or operations screen of the USA
region channel, touch the channel display area or the
ten-key icon button to indicate the numeric keypad.
2
2
2
.
.
.
Touch the [2] button.
“2” is appeared. Then if left for more than 2 seconds, the
hyphen is appeared and starts flashing as shown at right.
3
3
3
.
.
.
Touch the [0] button.
CH20 is set, and the [A] and [B] buttons appear.
4
4
4
.
.
.
Touch the [A] button.
Letter A is appeared and setting of the CH20A is finished.
1-