Users Manual

Options Operation
10-4
Turning the power on / off
When the external power is supplied to the NBG-980 Power supply connected to the
printer, the printer is turned on immediately.
To turn off the printer, press and hold the power switch for more than 5 seconds.
When turning on the printer again after turning off using the power switch, press and hold
the power switch until the LED lights up in orange. After lighting up, the LED turns off
immediately but the power is ON.
Loading the printer paper
1
1
1
.
.
.
Pull the release lever.
The paper cover is opened.
2
2
2
.
.
.
Insert the paper as shown at right.
Position the paper such that the edge extends
outside the printer, and press the both sides of
the paper cover to close it. When the paper
cover is closed, paper feed and cutting of the
leading edge of the paper are done
automatically.
Print surface