Users Manual

Maintenance & Inspection
6-7
6.4 Checking the setup condition
The system information can be confirmed for use in maintenance and inspection.
6.4.1 System information
The following describes the procedure to display such as the ID numbers or peripheral connection
conditions.
■ Procedure ■
1
1
1
.
.
.
From the main menu, touch the [MAINT] [SYSTEM
INFO] buttons.
The confirmable information are as below.
Item Name Contents Notes
SELF-ID Own ship's identification number (MMSI)
ATIS-ID The ATIS number for European inland waterways
NUM OF CTLRS
The number of connected controllers
Number of main unit and connected controllers
OWN CTLR ID The address number of this controller
WKR The setting status to use the watch-keeping receiver Default setting: Valid
PRIORITY CH The registered priority channel number Default setting: CH16
TX MONITOR
The setting status to monitor communications of a
controller at the other controllers and the external
speaker
Default setting: ON
AIS INFO
The AIS connection status
(RECEIVING/DISRUPTED/INVALID)
BAM INFO
The BAM connection status (NORMAL/CS
ERROR/INVALID)
S/N(RT) Device's serial number
S/N(OWN) Device's serial number (Only for the controller.)
PRN FUNC The setting status to use the printer functions Default setting: OFF
PRN PORT Printer's port number
UDP IP ADDR Device's UDP IP address
ETH IP ADDR Device's IP address
ETH MAC ADDR Device's MAC address
BT PAIRING Names of devices paired with Bluetooth
BT MAC ADDR Bluetooth's MAC address
GROUP-ID xx
The identification number of the group own ship
belongs to
xx: 01 - 20
Note