Users Manual
Settings & Registrations
5-15
5.6 Other settings
The following describes concerning the AIS, printer and controllers.
5.6.1 Enabling the AIS function
When connecting the AIS to use the information for such as a DSC call, set the import condition to
ON as follows.
■ Procedure ■
1
1
1
.
.
.
From the main menu, touch the [SETUP]→ [AIS
FUNC] buttons to display the screen as shown at
right.
2
2
2
.
.
.
After setting the IMPORT to ON, touch the [✓] button
to save it.
5.6.2 Setting printer property
When connecting the printers, configure the conditions as follows.
■ Procedure ■
1
1
1
.
.
.
From the main menu, touch the [SETUP]→ [PRN
PROP] buttons to display the screen as shown at right.
This menu includes the following settings.
STATE: Printer use or not
IP ADDRESS: Change the value if appropriate.
(172.016.060.181 as factory default setting)
PORT: Change the value if appropriate.
(09100 as factory default setting)
DATA OUT Printout setting of DSC messages
(AUTO or MANUAL)
DIRECTION: Printout direction
(INVERT or UPRIGHT)
2
2
2
.
.
.
After the setting is complete, touch the [✓] button to save them.