Users Manual

Settings & Registrations
5-11
5.5 Advanced settings for DSC
The following describes the procedure for the advanced DSC settings such as automatic
acknowledgement, as well as creating a PSTN number list.
■ Menu screen ■
From the main menu, touch the [SETUP]→ [DSC OPE]
buttons.
The following describes the procedures from this screen.
5.5.1 Automatic acknowledgement
While the automatic acknowledgement is set to ON and if there is no active event, if either one of
the individual calls below is received, the acknowledgement is sent automatically.
・ Safety test call
・ Safety position request call
・ Routine polling call
・ Individual call requesting communication with invalid channel (*)
(*) In this case, the acknowledgement “unable to comply” is sent.
■ Procedure ■
1
1
1
.
.
.
Touch the [AUTO ACK] button.
2
2
2
.
.
.
After inputting the automatic acknowledgement
settings, touch [✓ ] to save them.
The target calls are as follows.
- Safety test call: TEST
- Safety position request call: POSITION RQ
- Routine polling call: POLLING
- Individual call with invalid CH: INDIVIDUAL