Users Manual

Operation
4-48
4.6.5 Talk with a wireless speaker microphone (option)
Radiotelephony communication with other stations using the Bluetooth type wireless speaker
microphone is available.
(1) Pairing
■ Procedure ■
1
1
1
.
.
.
Check if the Bluetooth logo is indicated on the
upper line of the screen
If the logo is not indicated on the screen, from the main
menu, touch the [SETUP]→ [BT-SET]→ [BT FUNC]
buttons and change the BT SPMIC USE to ON, and then
touch the [✓ ] button to save it.
2
2
2
.
.
.
Set the Bluetooth type wireless speaker microphone to
the paring mode.
Incase of the BTR-155 manufactured by SAVOX at right,
when the device is off, press and hold the multi function
button for 5 sec to start the pairing mode with flashing the
blue and red light alternately. For more details, refer to
the instruction manual of the BTR-155.
3
3
3
.
.
.
From the main menu, touch the [SETUP]→ [BT SET]
→ [BT PAIR] buttons to start the pairing.
 The screen at right is appeared and start searching the
pairing.
 When the search is complete, the device name and the
MAC address are appeared on the screen as shown at
lower right.
4
4
4
.
.
.
Touch the targeted wireless speaker microphone to
complete the pairing.
After the pairing is finished successfully, the Bluetooth
logo becomes blue.
The latest paring information is registered in the control panel of the main unit
(JHS-800S) or controller (NCM-980). So once the pairing is finished, after that the
pairing is immediately finished just only powering on the both devices.
(2) Making calls
The communication method using the wireless speaker microphone is basically same as
the handset except for the functions concerning the cradle such as on-hook and off-hook.
Note
（ BTR-155 manufactured by SAVOX）
Multi function button