Users Manual

Operation
4-47
(2) Receiving a call from another controller
Procedure
1
1
1
.
.
.
If received an intercom call, the screen at right is
displayed and the ringing is started.
If not answered within 30 seconds, the state changes
busy. Also, touching the [CANCEL] button returns the
screen to the status display. Additionally, touching
the [ACCEPT] button makes the CONNECTED state.
2
2
2
.
.
.
When answering to the call, lift the handset and start
the communication.
Press PTT key to talk.
To finish the intercom, touch the [FINISH] button or
replace the handset on-hook.
- The OCC mark remains displayed even while
talking, because the called controller
(recipient) is in monitor mode.
- While using the intercom function between two
control panels, if the other main unit or the
other connected controllers, those screens
display as shown at right.
Note