User Manual

Features

• No moving parts for a nearly unlimited service life

• New Silicone Ring Sensor for drift-free operation and

extreme holding power

• Extreme Tail Lock and Rate modes

• Auto Trim function automatically sets the rudder trim

position for zero drift when the gyro has completed

the 3-second power up test.

• Manual dual gain control for easy setup

• Adjustable Tail Lock Holding Gain values for the

ultimate in ﬁne-tuning

• Dual Direction Servo Travel Limiters for easy setup

• High Frame Rate design for use with Digital/Super

Servos only

• Silver/chrome sensor case ﬁnish to isolate RF &

dissipate heat

• Battery voltage indicating LED makes checking the

battery voltage easy

• Compatible with JR

and most other brands of

radio systems

• Designed for use with PCM receivers and JR S8700G

Servo only

-1-

Speciﬁcations

Operating Voltage: ............. 4.8V–5.1V (regulated) only

Dimensions:

Sensor: ............................. 18 x 30.5 x 30.5mm

Ampliﬁer: ........................... 19 x 40 x 52mm

Weight: .............................. 50 g

Gyro Gain: .......................... Remote adjustable

Gyro Modes: ...................... Remote Tail Lock/

Rate Mode selection

Servo Travel Limiter: .......... Dual Left/Right Manual Pots